ShuttlePro — Dual-Mode Pressure Washer Gun Kit
ShuttlePro — Dual-Mode Pressure Washer Gun Kit
⚡ 0.5-Second Switch – One flick. Foam to rinse. No unscrewing. No wet hands.
🛡️ Pressure-Proof Seal – Solid brass, 4,000 PSI. No leaks. No cracks.
🧘 Zero-Interruption Wash – No shuffling. No stopping. Just a flawless finish.
Couldn't load pickup availability
ShuttlePro — Dual-Mode Pressure Washer Gun Kit
Description
Description
The Smartmerx ShuttlePro Manifold ends the Manual Shuffle — permanently.
One flick. Foam to rinse in 0.5 seconds. No stopping. No unscrewing. No Sunday ruined.
🔀 Foam Stage: Thick, clingy foam blankets your car before you touch it. No swirl marks. No scratches.
💧 Rinse Stage: One flick. Full pressure instantly. Wet hands stay on the gun — not the fittings.
👁️ Transition: AsymArm keeps the foam bottle out of your sight line. Eyes on the panel. Always.
Key Features:
⚡ 0.5-Second ShuttleFlick — One flick. Full flow. Zero stops.
🛡️ 4,000 PSI BrassCore — Solid brass outlasts plastic competitors that crack and drip.
👁️ Clear-Sight AsymArm — Foam bottle out of view. Every panel in focus.
📌 Nozzle-Lock Connection — Both cannon and nozzle on deck. Nothing hits the dirt.
🔌 Universal SnapFit — Fits Ryobi, Greenworks, Sun Joe. Zero adapters. Just wash.
How to use
How to use
- Snap It On: Connect the ShuttlePro to your pressure washer gun via the universal 1/4" quick-connect. Zero tools. Zero adapters.
- Load Your Cannon: Attach your foam cannon to the shorter arm. Lock your nozzle tip onto the longer arm.
- Foam First: Flick the shuttle valve to the cannon side. Blanket your vehicle in thick, clingy foam.
- Flick to Rinse: One flick of the shuttle valve. Full pressure instantly. Foam to rinse in 0.5 seconds.
- Flush After Use: Run clean water through both arms for 10 seconds. Store dry. Ready for next Sunday.
What you get
What you get
- One dual-purpose ShuttlePro switch spray gun
- Five color-coded high-pressure nozzles
💪 4,000 PSI BrassCore
👁️ Clear-Sight AsymArm
📌 Nozzle-Lock System
⚡ Universal SnapFit
💪 4,000 PSI BrassCore
👁️ Clear-Sight AsymArm
📌 Nozzle-Lock System
⚡ Universal SnapFit
💪 4,000 PSI BrassCore
👁️ Clear-Sight AsymArm
📌 Nozzle-Lock System
⚡ Universal SnapFit
💪 4,000 PSI BrassCore
👁️ Clear-Sight AsymArm
📌 Nozzle-Lock System
⚡ Universal SnapFit
💪 4,000 PSI BrassCore
👁️ Clear-Sight AsymArm
📌 Nozzle-Lock System
⚡ Universal SnapFit
💪 4,000 PSI BrassCore
👁️ Clear-Sight AsymArm
📌 Nozzle-Lock System
⚡ Universal SnapFit
💪 4,000 PSI BrassCore
👁️ Clear-Sight AsymArm
📌 Nozzle-Lock System
⚡ Universal SnapFit
💪 4,000 PSI BrassCore
👁️ Clear-Sight AsymArm
📌 Nozzle-Lock System
⚡ Universal SnapFit
💪 4,000 PSI BrassCore
👁️ Clear-Sight AsymArm
📌 Nozzle-Lock System
⚡ Universal SnapFit
💪 4,000 PSI BrassCore
👁️ Clear-Sight AsymArm
📌 Nozzle-Lock System
⚡ Universal SnapFit
See Why People Love ShuttlePro
No Swapping. No Leaking. No Compromises.
Real Answers. No Marketing Fluff.
Will the Smartmerx ShuttlePro fit my pressure washer?
Will the Smartmerx ShuttlePro fit my pressure washer?
The ShuttlePro connects via universal 1/4" quick-connect fitting, compatible with most electric and gas pressure washers including Ryobi, Greenworks, Sun Joe, and Simpson. Maximum rated pressure is 4,000 PSI.
Will it leak under high pressure?
Will it leak under high pressure?
The solid brass manifold and precision-sealed shuttle valve are engineered to hold up to 4,000 PSI without leaking. O-rings are included as free consumables — because we know high-pressure seals require occasional maintenance, and we've already thought of that for you.
Will the heavy brass manifold make my setup too heavy to hold?
Will the heavy brass manifold make my setup too heavy to hold?
The ShuttlePro is designed for one-handed operation. The asymmetrical arm keeps the foam bottle positioned away from your spray line, naturally distributing weight so your wrist stays comfortable through an entire wash.
How fast is the switch between foam and rinse?
How fast is the switch between foam and rinse?
One flick of the shuttle valve. No unscrewing. No setting tools in the dirt. No lost momentum. The transition takes 0.5 seconds — so your detailing zone stays uninterrupted from first foam to final rinse.
Is this just another cheap Amazon connector that falls apart after a few uses?
Is this just another cheap Amazon connector that falls apart after a few uses?
The ShuttlePro is built from solid brass and stainless steel — not the flimsy plastic that makes competing connectors crack, leak, and fail within weeks. You can feel the difference the moment it's in your hand.
Foam to Rinse in 0.5 Seconds
The Last Connector Your Pressure Washer Will Ever Need
Loved by 20,000+ Customers
-
★★★★★
You don't know you need one until you get one !
Been detailing my truck every Sunday for 3 years. The constant nozzle swapping was killing my flow. ShuttlePro changed everything. One flick and I'm rinsing. One flick back and I'm foaming. Feels solid in the hand too — nothing cheap about it. Best $40 I've spent on my setup.
-
★★★★★
Game changer. My neighbors keep asking where I got it.
I've tried two other dual connectors. Both leaked within a month. The ShuttlePro brass build is on another level. Zero drips after 6 washes. The asymmetrical arm is genius — foam bottle stays completely out of my way when I'm rinsing. Finally a connector that thinks like a detailer.
-
★★★★★
Washed both cars in the time it used to take me to do one.
The shuffle was ruining my Sunday therapy. Swap the cannon, lose a nozzle tip in the grass, lose my momentum. ShuttlePro eliminated all of it. Snapped onto my Ryobi in seconds. Thick foam, instant rinse, zero interruptions. This is what the hobby should feel like.
Don't Fall For Cheap Knock-Offs
Based on 5,000+ verified customer reviews
| Smartmerx | Others | |
|---|---|---|
| 0.5-Second ShuttleFlick | ||
| Leak-Proof Brass Build | ||
| Clear-Sight AsymArm | ||
| Nozzle-Lock System |